Products

machine granite slurry as partial replacement of fine aggregate

Granite Slurry for Partial Cement Replacement in Concrete

Granite Slurry for Partial Cement Replacement in Concrete: A Review Gaurav Sharma1, Dr. Ravi K Sharma 2 and Dr. Trilok Gupta3 adopted it as an alternative of fine aggregates in concrete and got quite good results of the resulting concrete properties [14-16]. While some of the researches was carried out to investigate the usage of granite

More

(PDF) Engineering Properties of Granite Slurry based GEO

This paper aims to study experimentally, the effect of partial replacement of coarse and fine aggregates by steel slag (SS), on the various strength and durability properties of concrete, by using

More

Optimization of Granite Powder used as Partial Replacement

Partial replacement of cement and usual fine aggregates with varying percentage of marble powder (0%, 5%, 10%, 15%, and 20%) and marble granules revealed that increased Waste Marble Powder (WMP) or Waste Marble Granule (WMG) resulted in increase in workability and compressive strength of mortar concrete [8].

More

AN EXPERIMENAL STUDY ON PARTIAL REPLACEMENT OF

AN EXPERIMENAL STUDY ON PARTIAL REPLACEMENT OF FINE AGGREGATE WITH GRANITE SLURRY AND CEMENT WITH GGBS Kavya B R1, Chandrashekar A R2 1Post Graduate in Structural Engineering, BIET College, Davanagere-577004, India 2Asst. Professor, M. Tech Structural Engineering, BIET College, Davanagere

More

replacement of fine aggregate with marble dust pdf

EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF using quarry dust as a replacement to fine aggregate along with super plasticizer. The chemical admixture used for the investigation is super plasticizer compact sp430. 0%, 10%, 20%, 30%, 40%, 50% and of traditional fine aggregate was replaced with quarry dust. Get Price

More

(PDF) UTILIZATION OF GRANITE CUTTING WASTE IN CONCRETE

The main objective of this study is to experimentally investigate the suitability of granite powder (GP) waste as a substitute material for fine/natural aggregate in concrete production.

More

Geopolymer concrete with partially replacement of granite

From this result concluded that due to Granite slurry increases the as compressive strength,flexural strength, Split Tensile strength of concrete. Eliyas Basha Shaik,Sreenivasulu Reddy studied Geopolymer Concrete with the replacement of granite Aggregate as Fine Aggregate. they concluded that strength of geopolymer concrete increases

More

GEOPOLYMER CONCRETE WITH PARTIALLY REPLACEMENT OF

geopolymer Concrete by replacement of Partially Granite Waste a fine Aggregate With Ambient Curing By replacement of fly ash 10 % Lime & GGBS 4 METHODOLOGY 4.1Material a. fly ash In present experimental work, low calcium, class F dry fly ash obtained

More

Partial Replacement of Coarse Aggregate with Broken

Partial Replacement of Coarse Aggregate with Broken Ceramic Tiles in Concrete Production Yiosese A. O., Ayoola A. R., Ugonna M. C., Adewale A. K. Abstract— The study reports on experimental investigation on the suitability of the use of broken tiles as partial replacement for crushed granite in concrete production.

More

Effect of Granite Dust as Partial Replacement to Natural

Sep 15, 2020· The possibility of using granite dust as partial replacement to natural sand in reinforced concrete beams is evaluated in this paper through a series of experimental investigations. The optimum sand replacement per cent is estimated through compressive strength tests on cube and cylindrical specimens. Then, three flexure-deficient reinforced concrete beams were cast using the blended fine

More

Journal of Engineering Granite Fines as a Partial

granite fines replacement which was as a result of strong bond between cement and granite fines content. The blocks made from 1:6 mix proportion using 10%, 15%, 25% and 100% granite fine replacement meet the Nigerian Industrial Standard (NIS 2000) specification. Although, blocks from 20% of granite

More

A Study on Partial Replacement of Natural Granite

machine for manufacture of fly ash aggregate is as shown in plate 1. In this paper the use of pelletized fly ash aggregate in concrete as a partial replacement of granite aggregate has been examined. The concrete so produced is light weight in nature and the 2 Fine Aggregate passing 4.75mm sieve Specific Gravity 2.60

More

STEEL SLAG AS REPLACEMENT OF FINE AGGREGATE IN

Coarse Aggregate The fractions from 20 mm to 4.75 mm are used as coarse aggregate. Machine crushed angular granite metal of 20 mm nominal size from the local source was used as coarse aggregate. It was free from impurities such as dust, clay particles and organic matter etc. The coarse aggregate chosen for Concrete was typically angular in shape,

More

partial replacement of sand by graded quarry dust in

Granite fines or rock dust is a byproduct obtained during crushing of granite rocks and is also called quarry dust. In recent days there were also been many attempts to use Fly Ash, an industrial by product as partial replacement for cement to have higher workability, long term strength and to make the concrete more economically available. Get

More

Review Paper on Partial Replacement of Fine Aggregate

production of aggregates through the crushing process of Keyword: concrete, industrial waste, mine waste, fine aggregate, partial replacement, sustainable construction, review paper 1. INTRODUCTION Concrete is a basic need in construction sector. Nowadays due to fast economic growth, rapid urbanization and

More

EXPERIMENTAL STUDY ON STRENGTH OF CONCRETE BY

CONCRETE BY PARTIAL REPLACEMENT OF FINE AGGREGATES WITH QUARRY DUST V. Aishwaryalakshmi Assistant Professor, Department of Civil Engineering, is the by-products which is formed in the processing of the granite stones which broken downs into the coarse aggregates of different sizes. (Compression Testing machine) for specimens casted on

More

Investigation on Strength Properties of Concrete with

fine aggregate (sand) and cement were partially replaced with Granite powder and marble powder. The replacement is done by 5%, 10%, 15%, 20%, 25% of cement by marble powder and 5%, 10%, 15%, 20%, 25% of fine aggregate by granite powder to evaluate the effect of presence of these replacement materials on the strength of specimens.

More

Partial Replacement of Coarse Aggregate with Broken

Partial Replacement of Coarse Aggregate with Broken Ceramic Tiles in Concrete Production Yiosese A. O., Ayoola A. R., Ugonna M. C., Adewale A. K. Abstract— The study reports on experimental investigation on the suitability of the use of broken tiles as partial replacement for crushed granite in concrete production.

More

use of waste material as partial replacement for concrete

Dr. Haider.K.Ammash the possibilities Waste Glass of size up to 5mm as a fine aggregate in concrete. The waste glass was used as a partial weight replacement of sand with percentages of 10, 20, 30 and 40 %. They found that, waste glass aggregate can be satisfactorily substituted for natural fine aggregate at replacement levels up to 20%.

More

Partial Replacement of Fine Aggregate by Glass Powder in

Concrete is prepared by mixing various materials like cement, Water, aggregates etc. which are economically available. IS 8112 is used for the work. The fine aggregate used in this investigation was clean river sand, whose maximum size is 4.75 mm, conforming to grading zone II. Machine crushed blue granite stone is used as coarse aggregate .

More

Experimental Study of Partial Replacement of Fine

Experimental Study of Partial Replacement of Fine Aggregate with Waste Material from China Clay Industries 1 A.Seeni, 2 Coarse aggregate: Machine crushed granite obtained from a local quarry was used as coarse aggregate. The properties of the coarse The measurement of materials was done by weight using electronic weighing machine. Water

More

Project on Partial Replacement of Cement with Marble Powder

Fineness modulus = 710.77/100 = 7.10% (3) MIX DESIGN: Mix design for concrete was made using the properties of constituents of concrete. Grade of concrete was taken as M20 and the mix design was done as per IS:10262-1982 and IS:456-2000.

More

A study of the chemical effect of marble and granite

Feb 04, 2020· Bakhoum et al. presented a study on the use of nano-granite waste particles as a partial replacement of cement and fine aggregate in mortar production. The research concluded that replacing 5% cement and 10% sand with nano-granite waste in the mortar mix increased the compressive strength of the green mortar by 41% compared to that of the

More